Moen Replacement Kitchen Faucet Head

If your Moen kitchen faucet is leaking or dripping, you may need to replace the faucet head. Replacing the faucet head is a relatively simple task that can be completed in about 30 minutes. Here are the steps on how to replace a Moen replacement kitchen faucet head:

1. Gather your materials. You will need the following items:

Replacement Moen faucet head
Adjustable wrench
Phillips head screwdriver

2. Turn off the water supply to the faucet. There should be two shut-off valves under the sink, one for the hot water and one for the cold water. Turn both valves clockwise to turn off the water supply.

3. Open the faucet to release any remaining water from the lines.

4. Use the adjustable wrench to loosen the nut that holds the old faucet head in place. The nut is located at the base of the faucet head, where it meets the faucet body.

5. Once the nut is loose, you can remove the old faucet head by hand. If the faucet head is stuck, you can use a Phillips head screwdriver to gently pry it loose.

6. Apply a thin bead of plumber's putty to the base of the new faucet head.

7. Screw the new faucet head onto the faucet body by hand. Tighten the nut using the adjustable wrench until it is snug.

8. Turn on the water supply to the faucet and check for leaks. If there are any leaks, tighten the nut further until the leaks stop.

9. You have now successfully replaced the Moen kitchen faucet head.