Kitchen Faucet Pull Out Sprayer Replacement

Replacing the pull out sprayer on a kitchen faucet is a relatively simple task that can be completed in about 30 minutes. The following step-by-step guide will walk you through the process.

Tools and Materials

New pull out sprayer
Adjustable wrench
Phillips screwdriver
Bucket or bowl
Cloth or sponge

Step-by-Step Instructions

1. Turn off the water supply

Locate the shut-off valves under the sink and turn them clockwise to turn off the water supply to the faucet.

2. Remove the old pull out sprayer

Use an adjustable wrench to loosen the nut that connects the pull out sprayer to the faucet body. Pull the sprayer straight out of the faucet body.

3. Clean the faucet body

Use a cloth or sponge to clean the faucet body where the new pull out sprayer will be installed. Remove any debris or old sealant.

4. Install the new pull out sprayer

Apply a thin bead of plumber's putty around the threads of the new pull out sprayer. Insert the sprayer into the faucet body and hand-tighten the nut. Use an adjustable wrench to fully tighten the nut.

5. Reattach the supply lines

Reattach the supply lines to the new pull out sprayer. Tighten the nuts by hand, then use an adjustable wrench to fully tighten them.

6. Turn on the water supply

Slowly turn on the shut-off valves under the sink to turn on the water supply to the faucet. Check for leaks around the pull out sprayer and tighten the nuts if necessary.

7. Test the pull out sprayer

Pull out the sprayer and test it to ensure that it is working properly. Check for leaks and adjust the spray settings as desired.

Tips

If you are having trouble removing the old pull out sprayer, try using a penetrating oil to loosen the nut.
When installing the new pull out sprayer, be careful not to overtighten the nut, as this could damage the sprayer.
If you are not comfortable replacing the pull out sprayer yourself, you can call a plumber to do it for you.