How To Install Backsplash In A Kitchen

The backsplash could be the very best approach to put the most effective stamp into your kitchen’s design using only a small project. It may be cheap and simple to do on your own, however it also helps make a big effect. Here’s the way to install a backsplash in your kitchen:

### 1. Make Plans

Ahead of getting started, take some time to prepare your kitchen for that backsplash installation. This involves removing all of the existing appliances, lighting fixtures, and other items that may be in the way. Additionally, you will have to clean the walls to take out any grease or grime which could prevent the backsplash from adhering properly.

### 2. Measure and mark

Following the surface is ready, it is time to determine and tag the location of your backsplash. Utilize a level to make sure that the top rated and bottom edges of the backsplash are level. Then, use a pencil to draw a line around the perimeter of the backsplash.

### 3. Cut the tiles

When the backsplash area is marked, it is time to minimize the tiles. For those who have a tile cutter, you should use it to make clean, straight cuts.

If you do not have a tile cutter, you can rent one from a hardware store.

#### 4. Apply adhesive to the wall

Once the tiles are cut, apply a thin layer of adhesive to the wall. Utilize a notched trowel to ensure that the adhesive is applied evenly.

### 5. Install the tiles

Start installing the tiles from the bottom row and continue working your way up. Press each tile firmly into the adhesive and use a level to make sure that it is level.

### 6. Grout the tiles

After the tiles are installed, it is time to grout them. Apply a thin layer of grout to the joints between the tiles. Utilize a grout float to smooth out the grout and remove any excess.

#### 7. Seal the tiles

After the grout has dried, apply a sealer to the tiles. This will help to protect the tiles from stains and damage and make them easier to clean.