Delta Kitchen Faucet Replacement Handle

Replacing the handle on your Delta kitchen faucet is a relatively simple task that can be completed in a few minutes with the right tools. By following these step-by-step instructions, you can quickly and easily restore your faucet to full functionality.

Tools and Materials:

Phillips head screwdriver
New Delta kitchen faucet handle

Step-by-Step Instructions:

1. Turn off the water supply: Before starting any work, shut off the water supply to the faucet. Locate the shut-off valves under the sink and turn them clockwise until they are fully closed.

2. Remove the handle screw: Use a Phillips head screwdriver to remove the screw located at the base of the handle. The screw may be covered by a plastic cap, which can be pried off with a flathead screwdriver.

3. Lift off the handle: Once the screw is removed, gently pull the handle straight up to detach it from the faucet. Do not twist or force the handle, as this could damage the faucet.

4. Remove the old cartridge (optional): In some Delta faucets, the handle is attached to a cartridge that also needs to be replaced. To remove the cartridge, use a pair of pliers to gently pull it straight up and out of the faucet body.

5. Install the new cartridge (if necessary): If you removed the old cartridge, insert the new one into the faucet body and press down firmly until it clicks into place.

6. Position the new handle: Align the new handle with the faucet stem and gently press it down until it fits snugly against the faucet body.

7. Secure the handle screw: Replace the handle screw and tighten it securely using the Phillips head screwdriver. Do not overtighten the screw.

8. Turn on the water supply: Turn on the shut-off valves under the sink to restore water flow to the faucet. Check for any leaks around the handle.

Troubleshooting:

Leaking handle: If the handle leaks after installation, check if the handle screw is properly tightened. If it is, the cartridge may need to be replaced.
Handle won't stay in place: Ensure that the handle is fully pressed down and that the handle screw is tightened securely.
Difficult to turn handle: If the handle is difficult to turn, the cartridge may be worn or damaged. Replace the cartridge to resolve the issue.

By following these instructions, you can easily replace the handle on your Delta kitchen faucet. This simple repair can save you both time and money, and restore your faucet to its proper working condition.