How To Lay Floor Tiles In Kitchen

Laying floor tiles is a great way to update the look of your kitchen. It can be a daunting task, but it's definitely doable with a little planning and preparation. Here are the steps on how to lay floor tiles in your kitchen:

1. Remove the old flooring

The first step is to remove the old flooring. If you have an existing tile floor, you can simply remove the tiles using a hammer and chisel. If you have a wood floor, you will need to pry up the planks using a pry bar.

2. Prepare the subfloor

Once the old flooring is removed, you need to prepare the subfloor. This means leveling the floor and making sure that it is smooth and flat. You can use a self-leveling compound to level the floor, and you can use a sander to smooth it out.

3. Lay out the tiles

Before you start laying the tiles, you need to lay them out on the floor to make sure that they fit properly. You can use a chalk line to mark the layout of the tiles, and you can use a level to make sure that they are level.

4. Apply the thinset

Once the tiles are laid out, you need to apply the thinset. Thinset is a type of mortar that is used to hold the tiles in place. You can apply the thinset using a notched trowel, and you need to make sure that it is evenly applied.

5. Set the tiles

Once the thinset is applied, you can start setting the tiles. You need to press the tiles firmly into the thinset, and you need to make sure that they are level. You can use a rubber mallet to tap the tiles into place, and you can use a level to check that they are level.

6. Grout the tiles

Once the tiles are set, you need to grout them. Grout is a type of mortar that is used to fill in the gaps between the tiles. You can apply the grout using a grout float, and you need to make sure that it is evenly applied.

7. Seal the tiles

Once the grout is dry, you need to seal the tiles. This will help to protect the tiles from wear and tear, and it will also make them easier to clean. You can apply the sealer using a brush or a roller, and you need to make sure that it is evenly applied.