How To Install Pulls On Kitchen Cabinets

Installing pulls on kitchen cabinets is a relatively simple task that can be completed in a few hours. With the right tools and materials, you can easily update the look of your kitchen without breaking the bank.

Before you begin, you'll need to gather a few supplies. You'll need a drill, a screwdriver, a tape measure, a level, and some wood screws. You'll also need to purchase the pulls that you want to install. Once you have all of your supplies, you can follow these steps to install the pulls.

Step 1: Choose the Location of the Pulls

The first step is to choose the location of the pulls. You'll want to place the pulls in a convenient location that is easy to reach. You'll also want to make sure that the pulls are spaced evenly apart.

To determine the location of the pulls, measure the width of the cabinet door. Then, divide the width of the door by two. This will give you the center point of the door. Mark the center point with a pencil.

Next, measure the height of the cabinet door. Divide the height of the door by three. This will give you the top and bottom locations of the pulls. Mark these locations with a pencil.

Step 2: Drill the Pilot Holes

Once you have marked the location of the pulls, you can drill the pilot holes. The pilot holes will help to guide the screws into the wood and prevent the wood from splitting.

To drill the pilot holes, use a drill bit that is slightly smaller than the diameter of the screws. Drill the pilot holes to a depth of about 1/2 inch.

Step 3: Install the Pulls

Now you can install the pulls. To do this, insert a screw into each pilot hole. Then, use a screwdriver to tighten the screws. Be careful not to overtighten the screws, as this could damage the wood.

Once the pulls are installed, you can step back and admire your work. You've now successfully updated the look of your kitchen cabinets!

Tips for Installing Pulls on Kitchen Cabinets

Here are a few tips for installing pulls on kitchen cabinets: